Computer quilting machine does the pattern cannot heavy line how to do?

Pattern running?

The reason:

There are problems in pattern making.

2. The machine frame runway has the card point and oil.

3. Synchronous belt damage and drive failure.

4. Damage to main controller.

5. Wrong signal for the drive.

6. The stepping signal line is interrupted by interference.

Methods:

One, make the pattern again.

2. Replace the bearing of the frame track and maintain the oil.

Replace the synchronous belt.

Iv. Replace the drive.

5. Replace the main controller.

6. Re-check the signal wire connection and check the line to eliminate the interference source.